SW520D Tilt Vibration Sensor Switch SW-520D

The SW-520 SW-520D is a single-directional trigger switch of the roller-type tilted vibration sensing.

• When the product is tilted to the cap and the tilt angle is greater than 10 degrees, it is an open OFF state. When the level of the product is inclined (with the lead parallel to the plane direction, the lower height is the same) and the horizontal tilt angle is greater than 10 degrees, it is a closed-circuit ON state.
• When the product is tilted to the cap and the tilt angle is greater than 10 degrees, it is an open OFF state. When the level of the product is inclined (with the lead parallel to the plane direction, the lead is at a higher height), the trigger terminal (gold-plated pins A and B) are lower than the horizontal tilt angle greater than the angle of 45 degrees, it is a closed-circuit ON state.
• The product has a good appearance, no rusty turbidity, cracks, or electroplating layer peeling.
•  

Specifications

• Model: SW520D
• Use Temperature Range: -20°C to +70°C
• Maximum Rated Voltage: 24VDC
• Voltage Drop: 0.2V max (inter-terminal impedance below 10N)
• Insulation Resistance: 10MΩ
• Contact Resistance: Less than 10Ω

Package Included

• 1 xSW520D Tilt Vibration Sensor Switch SW-520D